Product Categories


Thin sheet metal slitting line with cut to length function for gutter, ridge cap is a tool for an quite economic tool for metal processing. This tool is also could be used to separate coils: for example if the big coil is 10 ton, but you want to make it two small coil like 2 ton or 3 ton or others and then this machine can help you. But it only could be used to process the thin coil Max thickness to 1.5mm and it can slit Max 5 pieces. Here is the machine working flow for your reference:

working flow of cut to length















Here are more detail information of each elements for your reference:

Packing list
Part 1Hydraulic decoiler with loading car 5 Ton Optional manual one
Part 2Leveling,Slitting and Cut to length part
Part 3PLC control system
Part 4Hydraulic pump station
Part 5Tension stand
Part 6Hydraulic recoiler with loading car 5 TonOptional manual one


  1. Supporting the coils and doing uncoiling.
  2. It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter(508-610mm)of coils. It is equipped with the
  3. Motor drive the coils running and can do forward and reverse running as well as do the decoiling with
  4. Loadingcapacity: ≤5 tons
  5. Max coil width: 1250 mm
  6. Feeding speed: 0-20m/min (adjustable) Driving motor power: 5kw
  7. Hydraulic motor power: 4.0kw
  8. Structure: welding by the steel plates and profiled The decoiler is equipped with the pneumatic brake system

Thin Sheet Metal Slitting Line With Cut To Length Function For Gutter, Ridge Cap


Part 2:  Leveling, slitting and cut to length
Feeding deviceAdjustable
Leveling roller number13 rollers, 5up 6down
Leveling roller diameter50mm
Roller materialHigh grade 45# steel
Shaft diameter80 mm
Work speed0-15 m/min
Machine basic frameSteel plate welded
Power systemMotor drive, driven by the speed reducer and then give power to gear.
Driving power7.5 kw
Material thickness adjustingBy lifter, convenient to adjust for different thickness of material


slitting with cut to length
















Hydraulic recoiler 5 ton With the loading car With pressing arm

The press arm is fixed on the recoiler to wind each coils one by one and ensure the recoiling quality.

Loading capacity:≤6 tons

Inner diameter: 470-530mm

Main motor power: 11KW

Hydraulic station: 4KW

Coil width: 1250mm

The oil cylinder stroke of the loading trolley is longer, which is suitable for loading and unloading steel coils  with smaller outer diameter.

Thin Sheet Metal Slitting Line With Cut To Length Function For Gutter, Ridge Cap